Step 1: Measure the Width (Determine Rod/Track Length and Placement)

If you have had the rod installed, please measure the rod length and record this measurement.

If you do not have the rod installed, first decide where you want the curtain rod to be mounted above and on the sides of the window frame. Consider how high you want the rod to create the desired visual effect.

  • Height Above the Window Frame: Typically, curtain rods are installed 6-10 inches above the window frame to create the illusion of a taller window. Mark this height lightly with a pencil or use masking tape as a guide.
  • Width Beyond the Window Frame: Add extra width (normally 6-15 inches) on each side of the window frame for the curtains stack. Mark these points lightly with a pencil or use masking tape as a guide.

    • Step 2: Know TWOPAGES Default Fullness

    To avoid draperies looking like a stretched sheet, you need to consider to add fullness for certain header styles for additional width to cover.

    Pleated Style

    The fabric fullness is already accounted for in the design. We use 200-230% fabric fullness to create the pleats, ensuring a rich and voluminous look.

  • 2x Built-in Fullness for pinch pleat, tailor pleat, inverted pleat, and goblet style.
  • 2.3x Built-in Fullness for triple pleat and triple tailor pleat style.

    • *If you need a fuller look, you can consider adding extra 1.25x fullness based on your preference. This is a personal choice, not a requirement.

    oft Top and Grommet Style

    The default fullness is 1 (or 100%), then you should consider multiply 150-200% fullness for final measured width. 150% fullness will produce a more tailored look, while 200% fullness, which is recommended will create a richer, more opulent appearance. Recommended Fullness:

  • 1.5 times the rod width for a moderate gather.
  • 2 times the rod width for a standard gather.
  • You determine the fullness ratio to create folds according to header type.
  • You determine how many panels you need to achieve the desired fullness.
  • Fullness ratio varies by header styles.

    • 1x Fullness

    1.5x Fullness

    2x Fullness

    Step 3: Determine Drapery Finished Width and Length (with example)

    Pleated

    Soft Top

    Grommet

    Ripple Fold

    For track installed, measure from the carriers or hooks on the track down to your desired length.
    For track uninstalled, measure from the point where the curtain track will be installed (either on the ceiling or wall) down to the floor or your preferred endpoint. Then account for the Track Height(Track + Roller Hook Height) and your desired Curtain-to-Floor-Distance (gap between the bottom edge of the curtain and the floor), minus the two datas from the overall height.
    eg: If you install the track 96 inches from the floor, track height in 2 inches, and want a 1-inch floor distance:
    Ripple Fold Curtain Length = 96 - 2 - 1 = 93 inches
    (Adjust "Curtain-to-Floor Distance" based on your style preference for a neat finish.)
    *TWOPAGES Lora Track Height is 2 inches

    Determine Width

  • For Pleated Style, Single Panel Width = Rod Track Full Length / Panel Quantity
  • For Soft Top Style, Single Panel Width = (Rod Track Full Length x 200% fullness) / Panel Quantity
  • For Grommet Style, Single Panel Width = (Rod Track Full Length x 200% fullness) / Panel Quantity
  • For Ripple Fold Style, Single Panel Width = Rod Track Full Length / Panel Quantity

    • Find Your Perfect Placement

  • Different curtain lengths create diverse visual experiences to your room.

    • Note

  • Your custom drapery will be made to the width and length you specify.
  • Headers include Pinch Pleat, Pinch Pleat with Back Tab, Triple Pinch Pleat, Tailor Pleat, Triple Tailor Pleat, Flat Hooks, will come with adjustable pin hooks. Drapery rings or clip rings need to be purchased separately.
  • Use a steel tape measure, measuring to the nearest 1 inch in width and length.
  • Measure each window and doorway individually.
  • The perception of fullness can vary. Some may prefer a more relaxed drape, while others might want a fuller, more gathered appearance. Consider your personal taste and the intended look of your space when selecting the fullness factor.
  • This guide offers recommendations and advice but not inclusive for covering all possible scenarios and methods. For more complex measurements and inquiries, please email us at support@twopagescurtains.com.